Details

---

Description

In addition to highlights such as the versatile clamping range by using intermediate sleeves, the run-out and repeat accuracy of < 0.003 mm (DSE double clamping insert), and the easy handling, TENDO Turn particularly impresses by its unique vibration damping. This helps you to realize excellent workpiece surfaces.

Advantages – Your benefits

Exact axial length preadjustment
Length adjustment in the range of 0.01 mm accuracy, with adjustment travel of 10 mm
Permanent run-out and repeat accuracy of < 0.003 mm
Optimum surface results, high precision processing and safe processes due to uniform cutting action and highest reproducibility
Excellent vibration damping
Micro-blowouts are prevented, best workpiece surfaces, machine spindle protection, increased tool service life resulting in cost reductions
Micron precise tool change in seconds without peripheral equipment
Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices
Low maintenance
The completely closed system ensures a long service life
Fine-balanced by default
Suitable for high speeds with a balancing grade of G2.5 at 25,000 RPM (double clamping insert DSE)
High degree of flexibility
Clamping of different diameters due to the use of slotted or coolant-proof intermediate sleeves
Broad compatibility
Can be ideally combined with TENDO SVL and TRIBOS SVL extensions
All commercially available tool shank types can be clamped
Form A: with smooth cylindrical shank, shank form A in accordance with DIN 1835 and DIN 6535 HA
Form AB: with flat face and cylindrical shank with pulling face, shank form B in accordance with DIN 1835 and DIN 6535 HB
Form B: with lateral pulling faces, shank form B in accordance with DIN 1835
Form E: with inclined clamping face, shank form E in accordance with DIN 1835 and DIN 6535 HE
Dirt grooves for reliable torque transmission
Dry clamping surfaces, by displacement of oil, grease or lubricant residues into the dirt groove

Options and special information

Flexible clamping areas due to the use of intermediate sleeves
Intermediate sleeves allow clamping of various shank diameters from 3 - 32 mm with just one toolholder.
Your advantage: Reduction of the acquisition costs, higher clamping force at the given shank diameter.

Download PDF Below